Finding the Best The Class D Amplifier at a reasonable price is one of the most important aspects of shopping. The best options for products vary from one brand to another as well. The below-mentioned products are some of the best and most popular items that are being sold in the market today.
Best The Class D Amplifier
Planet Audio PL3000.1D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
2 used from $103.76
- Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
- Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
Skar Audio RP-350.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 350W
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 ohm | Remote Subwoofer Level Control Included
HiLetgo 5pcs PAM8403 2x 3W Mini Digital Power Amplifier Board AMP Class D 2.5-5V Input
- Super mini volume: 1.85 x 2.11 cm.Can be easily placed in a variety of digital products within a small space, high efficiency amplification
- Dual-channel stereo, 5V power supply can output 3W +3 W power, can be directly driven 4Ω, 8Ω small speakers, the output power, enough energy, good sound quality.
- Excellent noise suppression, no audio input in the case of ear close to the speaker can not hear any noise.
- The unique Class D digital powerless board with LC filter can be powered directly from the computer's USB.
- Double-panel wiring, properly solve the wiring caused by the potential balance and crosstalk between channels
Soundstream PN1.650D 650W Monoblock Picasso Nano Class-D Amplifier,Black & Silver
- Picasso Nano Series Monoblock Class D Car Amplifier
- RMS Power Rating: 4 ohms: 400 watts x 1 chan. / 2 ohms: 650 watts x 1 chan.
- Max power output: 650 watts x 1 chan.
- Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) & Variable low-pass filter (50-250 Hz, 24 dB/octave)
- Pulse Width Modulated MOSFET power supply
Taramps 4 Channel Car Amplifier – Class D Multichannel Amplifier 1200 Watt RMS, Car Electronics Car Audio Subwoofer 2 Ohm Stable Bass Boost Crossover for Car Speakers Sub Amp
- Quality - This Class D 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.
- Power – This Class D 1200 Watt RMS Car Amplifier has a power rating distribution as followed 300x4 @2 Ohms, 192x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
- Crossovers- The Taramps Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of fixed 90Hz Highpass & Lowpass crossovers.
- Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 9Hz-27KHZ, Bass Boost, SNR>88DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and 2 Ohm Stable
- Includes - (1) Taramps 1200W RMS 4 Channel Class D Amplifier
AITRIP 3 PCS MAX98357 Audio Power Amplifier Module I2S Class D Filterless Audio Amplifiers Board for Arduino, Raspberry Pi, ESP32
- The MAX98357 Pulse Code Modulation (PCM) plug-and-play speaker amplifiers take advantage of the flexibility of Maxim's pinout. 35 different clocks and 128 digital audio formats can be automatically configured with a single power supply.
- This DAC was a cheap and brilliant way to improve the audio quality of your esp32 project. It turned awful sound quality with horrible background noise to incredibly clear and enjoyable sound. you personally found lowering the gain to 3db worked best for your project.
- the device uses a high noise immunity digital input with high jitter tolerance. It also provides excellent electromagnetic interference suppression, allowing long-line connected speakers without the need for external filtering.
- Widely used for Arduino, Raspberry Pi and ESP32.
Audiobank P6001-G2 Monoblock 6000 WATTS Amp Class D 1 OHM Car Audio Stereo Amplifier with Remote Turn On/Off Circuit/Heavy-Duty Aluminium Alloy Heatsink Power and Protection Indicator - 2nd Gen
- 1 Ohm Stable Operation & Soft Turn On GEN2 Circuit
- Thermal and Speaker Short Protection Circuitry
- Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
- Continuously Variable Input Gain Control
- LED Power and Protection Indicators
BLAUPUNKT AMP1804BT Car Audio 4-Channel Class D Amplifier 1600W with Bluetooth Full Range Amp.
- 1600W Maximum Power Full-Range Amplifier With Bluetooth
- Optimized 150-watt RMS output and a max power output of 1600 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
- Amplifier Class D 4/3/2 Channel Max. Output Power: 1600W x 4 RMS Power (4 Ohms) 100W x 4 RMS Power (2 Ohms): 150W x 4
- Frequency Response: 10Hz - 30Hz Signal-To- Noise Ratio: =>90dB Voltage Supply: 11 - 15V DC Gain Adjust: 250mV-6V Dimension: 6.7" x 3.8" x 1.8"
AIYIMA A07 TPA3255 Power Amplifier 300Wx2 HiFi Class D Stereo Digital Audio Amp 2.0 Channel Amplifier for Passive Speaker Home Audio (A07+DC 32V Power Adapter)
$79.99 in stock
- ❶ This AIYIMA A07 power amplifier adopt the TPA3255D2 amp chip and NE5532 op-amp chip.Very Quiet, Runs Extremely Cool,Easy to set up.It's a nice mini audio component amplifiers for Home Audio stereo system
- ❷ 300W+300W HiFi integrated class D amplifier, Exclusively designed for the customers who pursue HiFi sound,High efficient max power output up to 300 Watt
- ❸ Two input ways:3.5mm AUX Audio input/ RCA Audio input（3.5mm interface is also Aux Audio output interface(3.5mm AUX sed as audio output can go to connect any Powered device: Speakers, Amplifier,Active Subwoofer ect.).More detail connection and use ways,pls see the main picture shown)
- ❹ Simple compact design,And the exterior design is delicate and beautiful little amp,It can match with your computer/ desktop /Home theatre system and so on;A computer, an tube preamp(TUBE A3 PRO / T7 / T8), matched with our A07 home speaker amplifier, connected to your home audio passive speakers to form a perfect HIFI system, allowing you to liberate your ears in this noisy city
- ❺ Package with a DC 32V 5A Power Adapter for free,But if you want to get the maximum power of 300W, you need to buy a power adapter that uses DC 48V and current is above 7A(Cannot use industrial power supply,and please choose the correct passive speaker power to use ).
Design Techniques For Integrated Cmos Class-D Audio Amplifiers (Advanced Electrical and Computer Engineering)
6 used from $47.23
|Is Adult Product|
|Number Of Pages||256|
Orion Ztreet Monoblock Car Amplifier – Class D Stereo Power Amplifier 2000 Watt Max, 1 Ohm Stable, Bass Boost, MOSFET Power Supply, Car Electronics Mono Sub Amp, Audio Speakers, Great for Subwoofers
- QUALITY - This Class D Monoblock Car Amplifier for subwoofer exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others.
- 1 Ohm Stable - This monoblock class D subwoofer amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D mono sub amp is designed to power subwoofers that have a constant demand of high power in order to operate effectively.
- Power – This Class D 2000 Watt Amplifier has a power rating distribution as followed 300 x 1RMS @ 1Ohm. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
- Crossovers- The Orion Ztreet Monoblock Car Amplifier offers you the ease of connectivity by providing the feature of crossover. This mono sub amp offers you a low pass cross-over of 40Hz-250Hz and a 4 gauge power and ground terminals with a remote bass knob
- Features – The monoblock bass boost amplifier has features like - Frequency Response: 10Hz~250KHZ, Bass Boost, SNR:90DB, Remote Bass Knob, 2-way protection
Soundstream ST4.1200D Stealth Series 1200W Class D 4 Channel Amplifier
- Stealth Series 1200W class D 4 channel amplifier RMS power 4Ω: 100X4/ RMS power 2ω: 150X4/ bridged 4Ω: 300X2 2-Ohm stereo &
- 4-Ohm bridged full-range operation Hybrid aluminum alloy heatsink for optimum dissipation Military grade SMT PCB maintains dynamic performance
- Package dimensions: 7.75" L x 3.0" W x 1.5" H
- Country of Origin: CHINA