8 main reasons why the washing machine makes a lot of noise when spinning

A small washing machine noise during spin-out is completely normal. In this mode, the drum accelerates to 1000 revolutions per minute (or even more), so you can’t get rid of the buzz. Normal noise – low, uniform, with a small “turbine effect” at the beginning of the spin procedure.

If the washing machine is noisy unevenly, very loudly, sometimes even vibrates when spinning-this signals first of all a breakdown. The damage can be either minor, which can be corrected independently, or quite serious, requiring a visit to the service center.

8 main reasons why the washing machine makes a lot of noise when spinning

Possible reasons why the washing machine makes a lot of noise during spin-out

Possible reasons why the existing washing machine starts to make a lot of noise when switching to spin mode are::

Underload, overload, unbalance of a loaded and drying of linen;

Incorrect placement of the washing machine directly in the room;

Preservation of transport retainers (bolts);

Ingress of a foreign object into the tank of the device;

Wear of the drum shaft bearing;

Malfunction of shock-absorbing springs or shock absorbers;

Malfunction of the electric motor or abrasion of its brushes;

Malfunction or blockage of the drain pump.

As you can see, the reasons for the increased noise level during diagnostics can be very different. And only in some cases, you can fix them yourself.

Cases when the washing machine makes a noise during spin-out due to improper use or installation

Before you grab a screwdriver or call a service technician, you should pay attention to the nature of the noise. If the washing machine emits uneven knocks, clicks, as if something is falling in it, hums weakly in between, and it is clear that it is not gaining standard speed – most likely, this indicates an underload or overload.

The washing machine is designed to work with a certain amount of linen. In spin mode, it tries to distribute it evenly inside the drum, so that when accelerating to 1000 revolutions per minute, there is no imbalance or skew. If there are too few items in it, or there is only one that is heavy (like running shoes), you can’t place them. The same thing happens if too many things are uploaded.

This problem, of course, can be solved independently. You must either report items (if there are too few of them), or pull out extra items (if there are too many). But it is generally not recommended to wring out sneakers and other shoes in a “washing machine” or some kind of centrifuge.

If the “washing machine” when drying wet clothes starts to hum and vibrate strongly, or even “jump”, this indicates first of all an incorrect installation. Check it out:

No distortions. If it turns out that the “washing machine” is tilted in any direction, set it on the level;

The lack of contact with the walls. The washing machine should stand at a distance of 2 cm from the nearest obstacle.;

The stability of the floor. If the floorboards under the unit are loose, then you should rearrange the device. Or strengthen the floor.

If the washing machine is noisy at the first start,then you need to immediately stop the set cycle and check whether all the transport bolts are unscrewed. The remaining retainers inside the device can damage the drum. And, of course, they will cause a strong noise, sharp “jumps” of the “washing machine” itself and an increased level of vibration.

These causes of increased noise during the spin cycle you can fix yourself. But in all other cases, you will need the intervention of a service specialist.

Cases when the washing machine makes a noise during spin-out and you need to call the master

The “washing machine” can make noise when spinning and due to more serious damage. And in these cases, you will need to contact the service center:

There is a foreign object between the drum and the inner wall of the tank.Most often, there are “bones” from a bra, flash drives, keys and large coins. In this case, the characteristic clanging, cracking, creaking and similar sounds can be heard during centrifugation.;

Bearing wear, on which the drum pulley is located. This functional element is closed by an oil seal, which, at the same time, also collapses over time. Water gets into the bearing-and it breaks. After that, the vibration increases, the noise becomes louder and “thinner” than usual, and sometimes you can also hear a rattle. If the bearing is seriously damaged, there is also leakage of varying intensity of the tank itself and the appearance of characteristic dark or rusty spots on clothing;

Wear or damage to the shock absorber or springs. In this case, the “washing machine” begins not only to make more noise, but also to noticeably knock, and sometimes even bounce with strong acceleration. You may also hear internal thuds and observe a skewed drum. The most striking sign of this failure is a significant increase in the vibration of the device;

Damage to the drain pump. With such damage, it is not the washing machine drum itself that makes the noise. Unpleasant sounds are heard “from below”, and there may also be a poor-quality discharge of waste water. Failure can be caused either by a foreign object entering the pump pump, or by the coils burning out, or by damage to the impeller;

Motor wear and tear. Breakage is quite rare, but it is regularly observed in old or actively used devices. If the electric motor is worn out (its brushes are worn out), then it becomes unable to gain sufficient speed during centrifugation, a characteristic low noise is heard from the motor, and sometimes sparks appear.

In rare cases, increased noise and vibration levels can also be caused byby destroying or detaching the counterweight; loosening the drum pulley; and dropping the interference filter. But, regardless of the nature of the breakdown, it is definitely not recommended to repair it yourself.

When repairing in all of the above situations, disassembly of the broken device is required. In addition, in some cases of damage, the only way to fix the problem is to replace the damaged spare part. So self-repair can be not only ineffective, but also traumatic.

You can only clean the pump pump yourself if it is dirty with something. But, again, the specific method of this repair varies for different models and manufacturers of household appliances.

So, regardless of the nature of the damage, it is recommended to call a service specialist who will identify the problem and fix it.

You like? Share!

You may be interested: